RF Test Rack Manufacturer in India - High-Throughput RF Shielded Testing for 5G, WiFi & IoT Production Lines
Test More. Test Faster. Never Compromise on Isolation.
India’s most trusted RF Test Rack – engineered for high-throughput production line testing and large-scale R&D labs. ≥125 dB isolation at 1 GHz. ISO 9001:2015 certified. Custom built to your line specifications.
✔ ≥125 dB Isolation @ 1 GHz
✔ Internal Width up to 1475 mm
✔ ISO 9001:2015 Certified
✔ Ships Pan-India & Globally
Built for Volume. Engineered for Precision.
RF Isolation’s Test Rack is not just a large enclosure; it is a high-performance RF shielding system purpose-built for production environments where speed, throughput, and repeatable isolation matter every single shift.
| Feature | What It Means for Your Production Line |
|---|---|
| ≥125 dB Isolation at 1 GHz | Delivers the same isolation performance as our bench-top units but at rack scale. Your production line gets ≥125 dB at 1 GHz, ≥120 dB at 3 GHz, and ≥90 dB at 6 GHz across a 1475 mm wide test cavity. |
| Large-Format Internal Cavity (1475 × 560 × 840 mm) | A 1475 mm internal width accommodates multiple devices simultaneously testing Wi-Fi routers, 5G CPE units, IoT gateways, or large antenna arrays side by side in a single enclosure, dramatically increasing throughput per shift. |
| Multiple Integrated Test Points | Purpose-built with multiple RF and signal test access points so your instruments and DUT connect without breaking the shielded environment, no signal leakage, no setup compromise, no delays between tests. |
| Rugged Welded Aluminium Construction | Heavy-duty CNC-bent and laser-welded aluminium frame built for industrial environments handles the rigour of daily production use, shift after shift, without structural degradation or door seal failure. |
| Copper Beryllium RF Door Contacts | The same copper beryllium finger contact technology used in our bench-top units proven for tens of thousands of open/close cycles without measurable degradation in shielding performance. Critical for high-cycle production use. |
| 100 kHz to 6 GHz Frequency Coverage | One rack covers every wireless protocol in your production line for tests from legacy 2.4 GHz Wi-Fi and Bluetooth to 5G Sub-6 GHz, RFID, NFC, and Zigbee. No need to switch enclosures for different device SKUs. |
| Fully Customizable Configuration | Custom internal layouts, additional SMA and I/O ports, motorized or manual door options, integrated cable management, and trolley-mounting configured to match your existing production line setup. |
| Meets Military-Grade Shielding Standards | Designed and verified to international RF shielding standards suitable for defense electronics manufacturing and aerospace testing where consistent attenuation is a compliance requirement, not just a preference. |
Why Production Teams and R&D Directors Choose RF Isolation
Every Rack Tested and Certified Before It Leaves Our Facility
Every RF Test Rack is individually tested at our in-house measurement facility in Ahmedabad before dispatching. You receive a shielding effectiveness test certificate with your unit with verified isolation measurements across the specified frequency range. No guesswork. No assumed performance.
Custom-Built for Your Exact Production Line
We do not sell a single standard rack and call it configurable. We engineer each RF Test Rack to your facility’s specifications internal layout, port panel configuration, door mechanism, and mounting system. Clients have included defense electronics manufacturers, telecom OEMs, and IoT production facilities across India and internationally.
ISO 9001:2015 Certified Manufacturing
Our Ahmedabad facility is ISO 9001:2015 certified. Every weld, every door fit; every absorber installation follows documented, audited quality procedures. Whether you order one rack or ten, each unit is built to the same verified standard.
On-Site Installation and Commissioning Support
Unlike standard equipment suppliers, we provide on-site installation and commissioning support for all RF Test Rack orders. Our engineers will visit your facility, install the rack in your production line, verify isolation performance in situ, and train your team on operation and maintenance.
Trusted Across India's Most Demanding Testing Environments
Nokia, Reliance Jio, Amazon India, C-DOT, Diebold Nixdorf, Sierra Wireless, Dixon Technologies over 200 companies trust RF Isolation’s shielding products. Our Test Racks operate in some of India’s highest-volume device testing environments.
Global Clients
0
+
Standard Models
0
+
Max Isolation @ 1 GHz
0
db
Countries Served
0
+
Our Clients
What Is an RF Test Rack?
An RF Test Rack is a large-format, rack-housed RF shielded enclosure designed for high-throughput wireless device testing in production-line and large-scale R&D environments. Unlike compact bench-top shield boxes designed for single-device testing, an RF Test Rack accommodates multiple devices under test (DUTs) simultaneously making it the right solution when testing volume, speed, and scalability matter as much as isolation performance.
Built from rugged welded aluminum and fitted with multi-layer RF absorbers, the RF Test Rack creates a controlled electromagnetic environment across 100 kHz to 6 GHz, isolating every DUT from ambient RF interference and from each other. The result is clean, accurate, repeatable test data across every device your line processes.
RF Isolation’s RF Test Racks are engineered and manufactured at our ISO 9001:2015 certified facility in Ahmedabad, India. Each rack is custom-built to your internal layout requirements, door configuration, and port panel specification then tested and certified before dispatching.
Industries That Use RF Test Racks
Consumer Electronics & Smartphone Manufacturing
Telecom OEM Production Lines (5G/4G Modules, CPE Devices)
IoT & Smart Home Device Manufacturers
Semiconductor & Electronics QA Facilities
Defence & Aerospace Electronics Testing
Automotive Wireless Module Manufacturing
Government & University RF Research Facilities
Technical Specifications - RID 15261
All dimensions are in mm. Isolation values are minimum guaranteed figures, verified by in-house measurement before dispatching. Custom configurations are available on request.
| Parameter | RID 15261 – Specification |
|---|---|
| Internal Dimensions (W × H × D) | 1475 mm × 560 mm × 840 mm |
| External Dimensions (W × H × D) | 1525 mm × 610 mm × 890 mm |
| Frequency Range | 100 kHz – 6 GHz |
| Shielding Effectiveness @ 1 GHz | ≥125 dB |
| Shielding Effectiveness @ 3 GHz | ≥120 dB |
| Shielding Effectiveness @ 6 GHz | ≥90 dB |
| Construction Material | Rugged welded aluminium (CNC-bent, laser-welded) |
| Door Contact Technology | Copper beryllium RF shielding fingers |
| Internal Lining | Multi-layer RF absorbing material |
| Rear Panel I/O Modules | Replaceable — configurable SMA, USB, power, DC filter ports |
| Mounting / Form Factor | Floor-standing rack (trolley and custom mounting options available) |
| Standards Compliance | Meets international RF shielding and military-grade attenuation standards |
| Customization | Internal layout, port panel, door type, dimensions — fully configurable |
| Test Certificate | Shielding effectiveness certificate provided with every unit |
Which RF Standalone Shield Box Is Right for You?
With 13 models available, choosing the right enclosure depends on three things: your device size, the frequency you need to test at, and how the box will be used. Use the guide below to find your match – or contact our team for a free expert recommendation.
Where RF Test Racks Are Used
RF Test Racks serve a fundamentally different role from bench-top shield boxes. They are infrastructure-level testing equipment designed to operate continuously in demanding, high-volume environments.
5G & 4G Production-Line Device Testing
Telecom device manufacturers integrate 5G or 4G modules into CPE. Routers and gateways use RF Test Racks to validate RF performance across the production line by testing multiple units per hour in a fully shielded environment. The large internal cavity of the RI D 15261 allows simultaneous testing of multiple production units without sacrificing the isolation each device requires for accurate measurement.
Wi-Fi 6 & Wi-Fi 6E Multi-DUT Testing
Wi-Fi 6 and 6E devices often have multiple antennas requiring simultaneous signal access at multiple frequencies up to 6 GHz. The RF Test Rack's large internal dimensions and configurable port panels make it the only practical enclosure for testing these complex antenna systems at production scale where a bench-top box would require testing one unit at a time.
IoT & Smart Home Device Manufacturing QA
IoT manufacturers with high-volume production run smart meters, connected appliances, industrial sensors, and smart home hubs use RF Test Racks for end-of-line QA. Each unit passes through the rack for a standardized RF performance check before being cleared for packaging. The rack's consistent shielding ensures every device is tested to the same specification, regardless of ambient RF conditions on the factory floor.
Defence & Aerospace Electronics Manufacturing
Defence electronics contractors use RF Test Racks as part of the manufacturing acceptance testing process for wireless systems that must meet strict isolation standards. Our racks built to military-grade shielding performance specifications and supplied with full test documentation meet the traceability and performance requirements of these environments.
Automotive Wireless Module Testing
Vehicle-to-everything (V2X), telematics, and connected car module manufacturers require large RF shielded enclosures to accommodate the physical size of automotive wireless hardware. The RI D 15261's 1475 mm internal width is well suited to testing automotive antenna systems and large-format module assemblies that cannot fit in standard bench-top enclosures.
Government & University RF Research Facilities
Research institutions conducting large-scale RF testing projects 6G prototype evaluation, spectrum research, EMC studies use RF Test Racks when the scale of the DUT or the need for multi-device simultaneous measurement exceeds the capacity of bench-top units.
Still unsure?
Talk to our shielding specialists
Frequently Asked Questions
What is the difference between an RF Test Rack and an RF Standalone Shield Box?
An RF Test Rack is built for production lines — it fits multiple devices at once and runs continuously. A Standalone Shield Box is for single-device testing on a lab bench. Need volume? Rack. Need one device at a time? Box.
How many devices can be tested simultaneously in the RF Test Rack?
Depends on your device size. The RI D 15261's 1475 mm internal width fits several standard-sized devices side by side. Share your device dimensions and we will confirm the exact count for your setup.
Can the RF Test Rack be integrated into an automated test system (ATS)?
Yes. We support motorized door mechanisms, automated locking, and trigger I/O for ATS integration. Share your control interface specs and our team will handle the rest.
What is the isolation performance at 5G frequencies?
The RI D 15261 delivers ≥90 dB at 6 GHz — covering all 5G Sub-6 GHz bands including n77, n78, and n79. Need higher isolation? Contact us for a custom configuration.
Do you provide on-site installation and commissioning support?
Yes — included as standard with every RF Test Rack order. Our engineers visit your facility, install the rack, verify isolation in situ, and train your team before leaving.
What is the lead time for an RF Test Rack?
Standard configurations: 4–6 weeks. Custom configurations (modified dimensions, motorized doors, ATS integration): 6–10 weeks. Contact us for a firm date on your order.
Can the rack dimensions be customized?
Yes - fully. Any internal width, height, or depth. Give us your floor plan constraints and DUT size, and we will engineer a rack that fits.
What maintenance does the RF Test Rack require?
Inspect the copper beryllium door contact fingers every 6 months and the internal absorber lining once a year. We supply spare parts, guidelines, and an annual maintenance service.
Do you export RF Test Racks internationally?
Yes. We ship to USA, UK, Turkey, Australia, Italy, Israel, and more. All international units are packed in reinforced industrial crating. Contact us for shipping timeline and cost to your country.
Does the RF Test Rack meet military-grade shielding standards?
Yes. Our racks meet international military and defence shielding standards. Full test documentation, certificate of compliance, and MIL-STD traceability support are available on request.
Get a Custom RF Test Rack Quote Today
Scale your RF testing. Eliminate interference on the production floor. Talk to our engineers — free of charge.
- Response within 24 hours
- On-site installation support included
- Ships to 15+ countries
- Custom-built to your specs
Related Products
